1
|
U-Boot SPL 2013.10-g0451b05 (Mar 22 2017 - 16:52:25)
|
2
|
MitySOM335x profile 4 - Model No: 3352-HX-X47-RI Serial No: 15013511
|
3
|
Configuring for 256 MB DDR3 @ 400MHz
|
4
|
Critical Link AM335X Maker Board -- NAND Page size = 2048k booting from dev 8
|
5
|
|
6
|
|
7
|
U-Boot 2013.10-g0451b05 (Mar 22 2017 - 16:52:25)
|
8
|
|
9
|
AM335X-GP rev 2
|
10
|
I2C: ready
|
11
|
DRAM: 256 MiB
|
12
|
WARNING: Caches not enabled
|
13
|
NAND: Using 2k bch8 layout
|
14
|
ECC Mode = 2 lo = 56/0
|
15
|
0 MiB
|
16
|
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
|
17
|
*** Warning - readenv() failed, using default environment
|
18
|
|
19
|
Net: cpsw:2 is connected to cpsw. Reconnecting to cpsw
|
20
|
cpsw, usb_ether
|
21
|
Hit any key to stop autoboot: 0
|
22
|
SD/MMC found on device 0
|
23
|
1179 bytes read in 6 ms (191.4 KiB/s)
|
24
|
Loaded environment from uEnv.txt
|
25
|
Importing environment from mmc ...
|
26
|
Running uenvcmd ...
|
27
|
1218 bytes read in 34 ms (34.2 KiB/s)
|
28
|
debug: [/boot/vmlinuz-4.4.30-ti-r64] ...
|
29
|
8644992 bytes read in 1250 ms (6.6 MiB/s)
|
30
|
debug: [/boot/initrd.img-4.4.30-ti-r64] ...
|
31
|
5157981 bytes read in 760 ms (6.5 MiB/s)
|
32
|
debug: [/boot/dtbs/4.4.30-ti-r64/am335x-mitysom-maker-1GB-NAND.dtb] ...
|
33
|
70297 bytes read in 124 ms (552.7 KiB/s)
|
34
|
debug: [console=tty0 console=ttyO0,115200n8 root=/dev/mmcblk0p1 rootfstype= coherent_pool=1M cape_universal=enable] ...
|
35
|
debug: [bootz 0x82000000 0x88080000:4eb45d 0x88000000] ...
|
36
|
Kernel image @ 0x82000000 [ 0x000000 - 0x83e980 ]
|
37
|
## Flattened Device Tree blob at 88000000
|
38
|
Booting using the fdt blob at 0x88000000
|
39
|
Using Device Tree in place at 88000000, end 88014298
|
40
|
|
41
|
Starting kernel ...
|
42
|
|
43
|
[ 0.000000] Booting Linux on physical CPU 0x0
|
44
|
[ 0.000000] Initializing cgroup subsys cpuset
|
45
|
[ 0.000000] Initializing cgroup subsys cpu
|
46
|
[ 0.000000] Initializing cgroup subsys cpuacct
|
47
|
[ 0.000000] Linux version 4.4.30-ti-r64 (root@a2-imx6q-wandboard-2gb) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Fri Nov 4 21:23:33 UTC 2016
|
48
|
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
|
49
|
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
|
50
|
[ 0.000000] Machine model: Critical Link MitySOM-335x
|
51
|
[ 0.000000] cma: Reserved 48 MiB at 0x8c800000
|
52
|
[ 0.000000] Memory policy: Data cache writeback
|
53
|
[ 0.000000] CPU: All CPU(s) started in SVC mode.
|
54
|
[ 0.000000] AM335X ES2.1 (neon )
|
55
|
[ 0.000000] PERCPU: Embedded 13 pages/cpu @cfb53000 s24320 r8192 d20736 u53248
|
56
|
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64448
|
57
|
[ 0.000000] Kernel command line: console=tty0 console=ttyO0,115200n8 root=/dev/mmcblk0p1 rootfstype= coherent_pool=1M cape_universal=enable
|
58
|
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
|
59
|
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
|
60
|
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
|
61
|
[ 0.000000] Memory: 185136K/260096K available (11361K kernel code, 917K rwdata, 3796K rodata, 744K init, 907K bss, 25808K reserved, 49152K cma-reserved, 0K highmem)
|
62
|
[ 0.000000] Virtual kernel memory layout:
|
63
|
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
|
64
|
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
|
65
|
[ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB)
|
66
|
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
|
67
|
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
|
68
|
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
|
69
|
[ 0.000000] .text : 0xc0008000 - 0xc0ed58e8 (15159 kB)
|
70
|
[ 0.000000] .init : 0xc0ed6000 - 0xc0f90000 ( 744 kB)
|
71
|
[ 0.000000] .data : 0xc0f90000 - 0xc1075528 ( 918 kB)
|
72
|
[ 0.000000] .bss : 0xc1078000 - 0xc115afa8 ( 908 kB)
|
73
|
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
|
74
|
[ 0.000000] Hierarchical RCU implementation.
|
75
|
[ 0.000000] Build-time adjustment of leaf fanout to 32.
|
76
|
[ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
|
77
|
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
|
78
|
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
|
79
|
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
|
80
|
[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
|
81
|
[ 0.000017] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
|
82
|
[ 0.000043] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
|
83
|
[ 0.000058] OMAP clocksource: timer1 at 24000000 Hz
|
84
|
[ 0.001843] clocksource_probe: no matching clocksources found
|
85
|
[ 0.002082] Console: colour dummy device 80x30
|
86
|
[ 0.003217] console [tty0] enabled
|
87
|
[ 0.003265] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
|
88
|
[ 0.003299] This ensures that you still see kernel messages. Please
|
89
|
[ 0.003333] update your kernel commandline.
|
90
|
[ 0.003379] Calibrating delay loop... 792.57 BogoMIPS (lpj=1585152)
|
91
|
[ 0.026415] pid_max: default: 32768 minimum: 301
|
92
|
[ 0.026603] Security Framework initialized
|
93
|
[ 0.026642] Yama: becoming mindful.
|
94
|
[ 0.026703] AppArmor: AppArmor disabled by boot time parameter
|
95
|
[ 0.026926] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
|
96
|
[ 0.026969] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
|
97
|
[ 0.027970] Initializing cgroup subsys io
|
98
|
[ 0.028040] Initializing cgroup subsys memory
|
99
|
[ 0.028116] Initializing cgroup subsys devices
|
100
|
[ 0.028159] Initializing cgroup subsys freezer
|
101
|
[ 0.028200] Initializing cgroup subsys net_cls
|
102
|
[ 0.028241] Initializing cgroup subsys perf_event
|
103
|
[ 0.028282] Initializing cgroup subsys net_prio
|
104
|
[ 0.028332] Initializing cgroup subsys pids
|
105
|
[ 0.028425] CPU: Testing write buffer coherency: ok
|
106
|
[ 0.028518] ftrace: allocating 34628 entries in 102 pages
|
107
|
[ 0.147844] CPU0: thread -1, cpu 0, socket -1, mpidr 0
|
108
|
[ 0.148037] Setting up static identity map for 0x80008280 - 0x800082d8
|
109
|
[ 0.152806] Brought up 1 CPUs
|
110
|
[ 0.152877] SMP: Total of 1 processors activated (792.57 BogoMIPS).
|
111
|
[ 0.152907] CPU: All CPU(s) started in SVC mode.
|
112
|
[ 0.154976] devtmpfs: initialized
|
113
|
[ 0.182849] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
|
114
|
[ 0.208714] omap_hwmod: debugss: _wait_target_disable failed
|
115
|
[ 0.237939] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
|
116
|
[ 0.242671] xor: measuring software checksum speed
|
117
|
[ 0.282408] arm4regs : 974.000 MB/sec
|
118
|
[ 0.322407] 8regs : 873.000 MB/sec
|
119
|
[ 0.362406] 32regs : 871.000 MB/sec
|
120
|
[ 0.402406] neon : 1384.000 MB/sec
|
121
|
[ 0.402434] xor: using function: neon (1384.000 MB/sec)
|
122
|
[ 0.402503] pinctrl core: initialized pinctrl subsystem
|
123
|
[ 0.404952] NET: Registered protocol family 16
|
124
|
[ 0.409204] DMA: preallocated 1024 KiB pool for atomic coherent allocations
|
125
|
[ 0.410917] cpuidle: using governor ladder
|
126
|
[ 0.410980] cpuidle: using governor menu
|
127
|
[ 0.417790] OMAP GPIO hardware version 0.1
|
128
|
[ 0.433645] No ATAGs?
|
129
|
[ 0.433698] hw-breakpoint: debug architecture 0x4 unsupported.
|
130
|
[ 0.434659] omap4_sram_init:Unable to allocate sram needed to handle errata I688
|
131
|
[ 0.434727] omap4_sram_init:Unable to get sram pool needed to handle errata I688
|
132
|
[ 0.514476] raid6: int32x1 gen() 183 MB/s
|
133
|
[ 0.582576] raid6: int32x1 xor() 141 MB/s
|
134
|
[ 0.650469] raid6: int32x2 gen() 243 MB/s
|
135
|
[ 0.718413] raid6: int32x2 xor() 159 MB/s
|
136
|
[ 0.786661] raid6: int32x4 gen() 227 MB/s
|
137
|
[ 0.854545] raid6: int32x4 xor() 159 MB/s
|
138
|
[ 0.922526] raid6: int32x8 gen() 225 MB/s
|
139
|
[ 0.990438] raid6: int32x8 xor() 148 MB/s
|
140
|
[ 1.058412] raid6: neonx1 gen() 1166 MB/s
|
141
|
[ 1.126439] raid6: neonx1 xor() 676 MB/s
|
142
|
[ 1.194410] raid6: neonx2 gen() 1506 MB/s
|
143
|
[ 1.262416] raid6: neonx2 xor() 937 MB/s
|
144
|
[ 1.330414] raid6: neonx4 gen() 1535 MB/s
|
145
|
[ 1.398409] raid6: neonx4 xor() 958 MB/s
|
146
|
[ 1.466417] raid6: neonx8 gen() 948 MB/s
|
147
|
[ 1.534434] raid6: neonx8 xor() 674 MB/s
|
148
|
[ 1.534462] raid6: using algorithm neonx4 gen() 1535 MB/s
|
149
|
[ 1.534490] raid6: .... xor() 958 MB/s, rmw enabled
|
150
|
[ 1.534515] raid6: using intx1 recovery algorithm
|
151
|
[ 1.545643] edma 49000000.edma: TI EDMA DMA engine driver
|
152
|
[ 1.552449] SCSI subsystem initialized
|
153
|
[ 1.553372] usbcore: registered new interface driver usbfs
|
154
|
[ 1.553492] usbcore: registered new interface driver hub
|
155
|
[ 1.553640] usbcore: registered new device driver usb
|
156
|
[ 1.554484] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
|
157
|
[ 1.554602] omap_i2c 4802a000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c1_pins, deferring probe
|
158
|
[ 1.554685] omap_i2c 4819c000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins, deferring probe
|
159
|
[ 1.554887] media: Linux media interface: v0.10
|
160
|
[ 1.554983] Linux video capture interface: v2.00
|
161
|
[ 1.555128] pps_core: LinuxPPS API ver. 1 registered
|
162
|
[ 1.555157] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
|
163
|
[ 1.555227] PTP clock support registered
|
164
|
[ 1.556360] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
|
165
|
[ 1.558008] NetLabel: Initializing
|
166
|
[ 1.558061] NetLabel: domain hash size = 128
|
167
|
[ 1.558086] NetLabel: protocols = UNLABELED CIPSOv4
|
168
|
[ 1.558176] NetLabel: unlabeled traffic allowed by default
|
169
|
[ 1.558717] clocksource: Switched to clocksource timer1
|
170
|
[ 1.690988] NET: Registered protocol family 2
|
171
|
[ 1.692009] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
|
172
|
[ 1.692083] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
|
173
|
[ 1.692146] TCP: Hash tables configured (established 2048 bind 2048)
|
174
|
[ 1.692260] UDP hash table entries: 256 (order: 1, 8192 bytes)
|
175
|
[ 1.692307] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
|
176
|
[ 1.692725] NET: Registered protocol family 1
|
177
|
[ 1.693421] RPC: Registered named UNIX socket transport module.
|
178
|
[ 1.693470] RPC: Registered udp transport module.
|
179
|
[ 1.693496] RPC: Registered tcp transport module.
|
180
|
[ 1.693522] RPC: Registered tcp NFSv4.1 backchannel transport module.
|
181
|
[ 1.694293] Unpacking initramfs...
|
182
|
[ 2.151407] Freeing initrd memory: 5040K (c8080000 - c856c000)
|
183
|
[ 2.152242] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
|
184
|
[ 2.155785] futex hash table entries: 256 (order: 2, 16384 bytes)
|
185
|
[ 2.155970] audit: initializing netlink subsys (disabled)
|
186
|
[ 2.156092] audit: type=2000 audit(2.076:1): initialized
|
187
|
[ 2.168255] zbud: loaded
|
188
|
[ 2.169142] VFS: Disk quotas dquot_6.6.0
|
189
|
[ 2.169509] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
|
190
|
[ 2.172851] NFS: Registering the id_resolver key type
|
191
|
[ 2.172983] Key type id_resolver registered
|
192
|
[ 2.173012] Key type id_legacy registered
|
193
|
[ 2.173068] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
|
194
|
[ 2.173521] fuse init (API version 7.23)
|
195
|
[ 2.174282] SGI XFS with ACLs, security attributes, realtime, no debug enabled
|
196
|
[ 2.184498] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
|
197
|
[ 2.184904] io scheduler noop registered
|
198
|
[ 2.184950] io scheduler deadline registered
|
199
|
[ 2.185048] io scheduler cfq registered (default)
|
200
|
[ 2.187067] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
|
201
|
[ 2.189315] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
|
202
|
[ 2.191352] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
|
203
|
[ 2.195310] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a 8250
|
204
|
[ 3.096912] console [ttyS0] enabled
|
205
|
[ 3.102348] [drm] Initialized drm 1.1.0 20060810
|
206
|
[ 3.162795] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
|
207
|
[ 3.169030] libphy: 4a101000.mdio: probed
|
208
|
[ 3.181676] davinci_mdio 4a101000.mdio: phy[2]: device 4a101000.mdio:02, driver Micrel KSZ9031 Gigabit PHY
|
209
|
[ 3.192603] cpsw 4a100000.ethernet: Detected MACID = ec:24:b8:97:39:5b
|
210
|
[ 3.199576] cpsw 4a100000.ethernet: cpts: overflow check period 2125
|
211
|
[ 3.208373] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
|
212
|
[ 3.215210] ehci-platform: EHCI generic platform driver
|
213
|
[ 3.220803] ehci-omap: OMAP-EHCI Host Controller driver
|
214
|
[ 3.226676] usbcore: registered new interface driver usb-storage
|
215
|
[ 3.235308] 47401300.usb-phy supply vcc not found, using dummy regulator
|
216
|
[ 3.246933] 47401b00.usb-phy supply vcc not found, using dummy regulator
|
217
|
[ 3.256574] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
|
218
|
[ 3.262489] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
|
219
|
[ 3.270941] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
|
220
|
[ 3.277837] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
221
|
[ 3.285153] usb usb1: Product: MUSB HDRC host driver
|
222
|
[ 3.290181] usb usb1: Manufacturer: Linux 4.4.30-ti-r64 musb-hcd
|
223
|
[ 3.296256] usb usb1: SerialNumber: musb-hdrc.1.auto
|
224
|
[ 3.302365] hub 1-0:1.0: USB hub found
|
225
|
[ 3.306382] hub 1-0:1.0: 1 port detected
|
226
|
[ 3.321942] mousedev: PS/2 mouse device common for all mice
|
227
|
[ 3.330610] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
|
228
|
[ 3.339150] i2c /dev entries driver
|
229
|
[ 3.344599] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
|
230
|
[ 3.352117] cpuidle: enable-method property 'ti,am3352' found operations
|
231
|
[ 3.428498] hidraw: raw HID events driver (C) Jiri Kosina
|
232
|
[ 3.435164] usbcore: registered new interface driver usbhid
|
233
|
[ 3.440846] usbhid: USB HID core driver
|
234
|
[ 3.445241] ashmem: initialized
|
235
|
[ 3.449463] remoteproc0: wkup_m3 is available
|
236
|
[ 3.454060] remoteproc0: Note: remoteproc is still under development and considered experimental.
|
237
|
[ 3.463151] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
|
238
|
[ 3.478438] NET: Registered protocol family 10
|
239
|
[ 3.485138] mip6: Mobile IPv6
|
240
|
[ 3.488465] NET: Registered protocol family 17
|
241
|
[ 3.493051] mmc0: host does not support reading read-only switch, assuming write-enable
|
242
|
[ 3.501358] Key type dns_resolver registered
|
243
|
[ 3.505727] mpls_gso: MPLS GSO support
|
244
|
[ 3.509916] omap_voltage_late_init: Voltage driver support not added
|
245
|
[ 3.516549] mmc0: new high speed SDHC card at address aaaa
|
246
|
[ 3.523563] PM: Cannot get wkup_m3_ipc handle
|
247
|
[ 3.529211] mmcblk0: mmc0:aaaa SU04G 3.69 GiB
|
248
|
[ 3.533973] ThumbEE CPU extension supported.
|
249
|
[ 3.539415] Registering SWP/SWPB emulation handler
|
250
|
[ 3.544512] mmcblk0: p1
|
251
|
[ 3.549463] registered taskstats version 1
|
252
|
[ 3.554065] zswap: loaded using pool lzo/zbud
|
253
|
[ 3.570266] Btrfs loaded
|
254
|
[ 3.600983] Key type encrypted registered
|
255
|
[ 3.608743] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
|
256
|
[ 3.616739] at24 0-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
|
257
|
[ 3.624396] at24 0-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
|
258
|
[ 3.632104] at24 0-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
|
259
|
[ 3.639657] at24 0-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
|
260
|
[ 3.647144] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
|
261
|
[ 3.654332] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 400 kHz
|
262
|
[ 3.674999] tps65910 2-002d: No interrupt support, no core IRQ
|
263
|
[ 3.708503] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 400 kHz
|
264
|
[ 3.715737] remoteproc0: powering up wkup_m3
|
265
|
[ 3.720260] remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217148
|
266
|
[ 3.727952] remoteproc0: remote processor wkup_m3 is now up
|
267
|
[ 3.727974] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x192
|
268
|
[ 3.746970] bone_capemgr bone_capemgr: Invalid board signature 'ffffffff'
|
269
|
[ 3.753870] bone_capemgr bone_capemgr: Failed to scan baseboard eeprom
|
270
|
[ 3.761140] vdd_mpu: supplied by vbat
|
271
|
[ 3.766893] PM: bootloader does not support rtc-only!
|
272
|
[ 3.773200] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
|
273
|
[ 3.782187] of_cfs_init
|
274
|
[ 3.784907] of_cfs_init: OK
|
275
|
[ 3.796443] Freeing unused kernel memory: 744K (c0ed6000 - c0f90000)
|
276
|
Loading, please wait...
|
277
|
[ 3.913487] mmc1: MAN_BKOPS_EN bit is not set
|
278
|
starting version 230
|
279
|
[ 3.927963] mmc1: new high speed MMC card at address 0001
|
280
|
[ 3.939896] random: systemd-udevd: uninitialized urandom read (16 bytes read, 19 bits of entropy available)
|
281
|
[ 3.955677] mmcblk1: mmc1:0001 MMC04G 3.52 GiB
|
282
|
[ 3.967580] mmcblk1boot0: mmc1:0001 MMC04G partition 1 16.0 MiB
|
283
|
[ 3.975908] random: systemd-udevd: uninitialized urandom read (16 bytes read, 19 bits of entropy available)
|
284
|
[ 3.987970] random: udevadm: uninitialized urandom read (16 bytes read, 19 bits of entropy available)
|
285
|
[ 3.998294] mmcblk1boot1: mmc1:0001 MMC04G partition 2 16.0 MiB
|
286
|
[ 4.005750] random: systemd-udevd: uninitialized urandom read (16 bytes read, 19 bits of entropy available)
|
287
|
[ 4.019328] random: udevadm: uninitialized urandom read (16 bytes read, 19 bits of entropy available)
|
288
|
[ 4.031178] random: udevadm: uninitialized urandom read (16 bytes read, 19 bits of entropy available)
|
289
|
[ 4.044888] random: systemd-udevd: uninitialized urandom read (16 bytes read, 19 bits of entropy available)
|
290
|
[ 4.056194] random: udevadm: uninitialized urandom read (16 bytes read, 19 bits of entropy available)
|
291
|
[ 4.066090] random: systemd-udevd: uninitialized urandom read (16 bytes read, 19 bits of entropy available)
|
292
|
[ 4.077012] random: udevadm: uninitialized urandom read (16 bytes read, 19 bits of entropy available)
|
293
|
Begin: Loading essential drivers ... done.
|
294
|
Begin: Running /scripts/init-premount ... done.
|
295
|
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
|
296
|
Begin: Running /scripts/local-premount ... done.
|
297
|
Begin: Will now check root file system ... fsck from util-linux 2.25.2
|
298
|
fsck: error 2 (No such file or directory) while executing fsck.ext4 for /dev/mmcblk0p1
|
299
|
fsck exited with status code 8
|
300
|
done.
|
301
|
Warning: File system check failed but did not detect errors
|
302
|
[ 13.370921] EXT4-fs (mmcblk0p1): INFO: recovery required on readonly filesystem
|
303
|
[ 13.378415] EXT4-fs (mmcblk0p1): write access will be enabled during recovery
|
304
|
[ 13.500466] EXT4-fs (mmcblk0p1): recovery complete
|
305
|
[ 13.514029] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
|
306
|
done.
|
307
|
Begin: Running /scripts/local-bottom ... done.
|
308
|
Begin: Running /scripts/init-bottom ... done.
|
309
|
[ 14.099907] systemd[1]: System time before build time, advancing clock.
|
310
|
[ 14.152320] systemd[1]: Failed to insert module 'kdbus': Function not implemented
|
311
|
[ 14.210585] systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
|
312
|
[ 14.229817] systemd[1]: Detected architecture arm.
|
313
|
|
314
|
Welcome to Debian GNU/Linux 8 (jessie)!
|
315
|
|
316
|
[ 14.251148] systemd[1]: Set hostname to <mitysommtk>.
|
317
|
[ 14.927551] systemd[1]: Listening on fsck to fsckd communication Socket.
|
318
|
[ OK ] Listening on fsck to fsckd communication Socket.
|
319
|
[ 14.947888] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
|
320
|
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
|
321
|
[ 14.967914] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
|
322
|
[ OK ] Started Dispatch Password Requests to Console Directory Watch.
|
323
|
[ 14.987789] systemd[1]: Listening on Syslog Socket.
|
324
|
[ OK ] Listening on Syslog Socket.
|
325
|
[ 15.000578] systemd[1]: Created slice System Slice.
|
326
|
[ OK ] Created slice System Slice.
|
327
|
[ 15.011512] systemd[1]: Reached target Encrypted Volumes.
|
328
|
[ OK ] Reached target Encrypted Volumes.
|
329
|
[ 15.024497] systemd[1]: Created slice system-getty.slice.
|
330
|
[ OK ] Created slice system-getty.slice.
|
331
|
[ 15.039859] systemd[1]: Listening on Journal Socket.
|
332
|
[ OK ] Listening on Journal Socket.
|
333
|
[ 15.056079] systemd[1]: Mounting /sys/kernel/debug...
|
334
|
Mounting /sys/kernel/debug...
|
335
|
[ 15.076111] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
|
336
|
[ OK ] Started Forward Password Requests to Wall Directory Watch.
|
337
|
[ 15.111360] systemd[1]: Reached target Paths.
|
338
|
[ OK ] Reached target Paths.
|
339
|
[ 15.124146] systemd[1]: Created slice User and Session Slice.
|
340
|
[ OK ] Created slice User and Session Slice.
|
341
|
[ 15.139540] systemd[1]: Listening on Journal Socket (/dev/log).
|
342
|
[ OK ] Listening on Journal Socket (/dev/log).
|
343
|
[ 15.165789] systemd[1]: Starting Create list of required static device nodes for the current kernel...
|
344
|
Starting Create list of required st... nodes for the current kernel...
|
345
|
[ 15.229990] systemd[1]: Starting Load Kernel Modules...
|
346
|
Starting Load Kernel Modules...
|
347
|
[ 15.279417] systemd[1]: Reached target Remote File Systems (Pre).
|
348
|
[ OK ] Reached target Remote File Systems (Pre).
|
349
|
[ 15.328567] systemd[1]: Starting File System Check on Root Device...
|
350
|
Starting File System Check on Root Device...
|
351
|
[ 15.371607] systemd[1]: Reached target Remote File Systems.
|
352
|
[ OK ] Reached target Remote File Systems.
|
353
|
[ 15.408344] systemd[1]: Listening on Journal Audit Socket.
|
354
|
[ OK ] Listening on Journal Audit Socket.
|
355
|
[ 15.440714] systemd[1]: Starting Journal Service...
|
356
|
Starting Journal Service...
|
357
|
[ 15.475768] systemd[1]: Listening on udev Control Socket.
|
358
|
[ OK ] Listening on udev Control Socket.
|
359
|
[ 15.503729] systemd[1]: Listening on udev Kernel Socket.
|
360
|
[ OK ] Listening on udev Kernel Socket.
|
361
|
[ 15.535525] systemd[1]: Reached target Swap.
|
362
|
[ OK ] Reached target Swap.
|
363
|
[ 15.561611] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
|
364
|
[ OK ] Set up automount Arbitrary Executab...ats File System Automount Point.
|
365
|
[ 15.607631] systemd[1]: Created slice system-serial\x2dgetty.slice.
|
366
|
[ OK ] Created slice system-serial\x2dgetty.slice.
|
367
|
[ 15.641874] systemd[1]: Mounting POSIX Message Queue File System...
|
368
|
Mounting POSIX Message Queue File System...
|
369
|
[ 15.771783] systemd[1]: Starting LSB: Set console font and keymap...
|
370
|
Starting LSB: Set console font and keymap...
|
371
|
[ 15.823340] systemd[1]: Reached target Slices.
|
372
|
[ OK ] Reached target Slices.
|
373
|
[ 15.886122] systemd[1]: Mounted POSIX Message Queue File System.
|
374
|
[ OK ] Mounted POSIX Message Queue File System.
|
375
|
[ 15.923530] systemd[1]: Mounted /sys/kernel/debug.
|
376
|
[ OK ] Mounted /sys/kernel/debug.
|
377
|
[ 15.944382] systemd[1]: Started Journal Service.
|
378
|
[ OK ] Started Journal Service.
|
379
|
[ OK ] Started Create list of required sta...ce nodes for the current kernel.
|
380
|
[ OK ] Started Load Kernel Modules.
|
381
|
[ OK ] Started File System Check on Root Device.
|
382
|
[ OK ] Started LSB: Set console font and keymap.
|
383
|
[ OK ] Started File System Check Daemon to report status.
|
384
|
Mounting FUSE Control File System...
|
385
|
Starting Apply Kernel Variables...
|
386
|
Mounting Configuration File System...
|
387
|
Starting Create Static Device Nodes in /dev...
|
388
|
[ OK ] Mounted Configuration File System.
|
389
|
[ OK ] Mounted FUSE Control File System.
|
390
|
[ OK ] Started Apply Kernel Variables.
|
391
|
[ OK ] Started Create Static Device Nodes in /dev.
|
392
|
Starting udev Kernel Device Manager...
|
393
|
[ OK ] Started udev Kernel Device Manager.
|
394
|
Starting LSB: Set preliminary keymap...
|
395
|
Starting LSB: Tune IDE hard disks...
|
396
|
[ OK ] Started LSB: Set preliminary keymap.
|
397
|
Starting Remount Root and Kernel File Systems...
|
398
|
[ 17.001618] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro
|
399
|
[ OK ] Started Remount Root and Kernel File Systems.
|
400
|
[ OK ] Reached target Local File Systems (Pre).
|
401
|
[ OK ] Reached target Local File Systems.
|
402
|
Starting Raise network interfaces...
|
403
|
Starting Flush Journal to Persistent Storage...
|
404
|
Starting udev Coldplug all Devices...
|
405
|
[ 17.290886] random: nonblocking pool is initialized
|
406
|
Starting Load/Save Random Seed...
|
407
|
[ OK ] Started LSB: Tune IDE hard disks.
|
408
|
[ OK ] Started Load/Save Random Seed.
|
409
|
[ 17.612980] systemd-journald[573]: Received request to flush runtime journal from PID 1
|
410
|
[ OK ] Started Flush Journal to Persistent Storage.
|
411
|
Starting Create Volatile Files and Directories...
|
412
|
[ OK ] Started Create Volatile Files and Directories.
|
413
|
Starting Update UTMP about System Boot/Shutdown...
|
414
|
Starting Network Time Synchronization...
|
415
|
[ OK ] Started Update UTMP about System Boot/Shutdown.
|
416
|
[ OK ] Started Network Time Synchronization.
|
417
|
[ OK ] Reached target System Time Synchronized.
|
418
|
[ OK ] Started udev Coldplug all Devices.
|
419
|
[ OK ] Reached target System Initialization.
|
420
|
[ OK ] Listening on bonescript.socket.
|
421
|
[ OK ] Listening on cloud9.socket.
|
422
|
[ OK ] Listening on D-Bus System Message Bus Socket.
|
423
|
[ OK ] Started Daily Cleanup of Temporary Directories.
|
424
|
[ OK ] Reached target Timers.
|
425
|
[ OK ] Listening on node-red.socket.
|
426
|
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
|
427
|
[ OK ] Reached target Sockets.
|
428
|
[ OK ] Reached target Basic System.
|
429
|
Starting Restore /etc/resolv.conf i...e the ppp link was shut down....
|
430
|
Starting System Logging Service...
|
431
|
Starting LSB: Load kernel modules needed to enable cpufreq scaling...
|
432
|
[ OK ] Started Regular background program processing daemon.
|
433
|
Starting LSB: Start busybox udhcpd at boot time...
|
434
|
[ OK ] Started D-Bus System Message Bus.
|
435
|
Starting Connection service...
|
436
|
[ OK ] Started BB WL18xx wlan0 Service.
|
437
|
Starting Login Service...
|
438
|
Starting Cape Manager Service...
|
439
|
Starting Generic Board Startup...
|
440
|
Starting LSB: Start daemon at boot time...
|
441
|
[ OK ] Started Entropy daemon using the HAVEGE algorithm.
|
442
|
[ OK ] Started Bonescript autorun.
|
443
|
Starting Avahi mDNS/DNS-SD Stack...
|
444
|
[ 22.899836] net eth0: initializing cpsw version 1.12 (0)
|
445
|
[ 22.905292] net eth0: initialized cpsw ale version 1.4
|
446
|
[ 22.910537] net eth0: ALE Table size 1024
|
447
|
[ 23.156622] net eth0: phy found : id is : 0x221622
|
448
|
[ 23.201500] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
|
449
|
[ OK ] Started System Logging Service.
|
450
|
[ OK ] Started Restore /etc/resolv.conf if...ore the ppp link was shut down..
|
451
|
[ OK ] Started Cape Manager Service.
|
452
|
[ OK ] Started Generic Board Startup.
|
453
|
[ OK ] Started LSB: Start busybox udhcpd at boot time.
|
454
|
[ OK ] Started LSB: Start daemon at boot time.
|
455
|
[ OK ] Started Connection service.
|
456
|
[ OK ] Started Avahi mDNS/DNS-SD Stack.
|
457
|
[ OK ] Started Login Service.
|
458
|
[ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
|
459
|
Starting Hostname Service...
|
460
|
Starting WPA supplicant...
|
461
|
Starting LSB: set CPUFreq kernel parameters...
|
462
|
[ OK ] Started Raise network interfaces.
|
463
|
[ OK ] Started WPA supplicant.
|
464
|
[ OK ] Started Hostname Service.
|
465
|
[ OK ] Reached target Network.
|
466
|
[ OK ] Started OpenBSD Secure Shell server.
|
467
|
[ OK ] Reached target Network is Online.
|
468
|
Starting LSB: Apache2 web server...
|
469
|
Starting /etc/rc.local Compatibility...agement daemon...
|
470
|
Starting Permit User Sessions...
|
471
|
[ OK ] Started LSB: set CPUFreq kernel parameters.
|
472
|
[ OK ] Started LSB: Advanced IEEE 802.11 management daemon.
|
473
|
[ OK ] Started /etc/rc.local Compatibility.
|
474
|
[ OK ] Started Permit User Sessions.
|
475
|
Starting Light Display Manager...
|
476
|
[ OK ] Started Getty on tty1.
|
477
|
[ OK ] Started Light Display Manager.
|
478
|
[ OK ] Stopped Light Display Manager.
|
479
|
Starting Light Display Manager...
|
480
|
[ OK ] Started Light Display Manager.
|
481
|
|
482
|
Debian GNU/Linux 8 mitysommtk ttyS0
|
483
|
|
484
|
BeagleBoard.org Debian Image 2016-11-06
|
485
|
|
486
|
Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian
|
487
|
|
488
|
default username:password is [debian:temppwd]
|
489
|
|
490
|
mitysommtk login:
|