Activity
From 05/06/2016 to 06/04/2016
06/02/2016
- 02:39 PM Software Development: RE: Pinmux changes back on its own
- Hi Jonathan, thanks for looking into this. The L138 technical reference manual does show many of the SYSCFG registers...
- 01:50 PM Software Development: RE: Pinmux changes back on its own
- Found this post for the 335x which mentions that the pinmux registers are protected. Its likely this is also true fo...
- 01:30 PM Software Development: RE: Pinmux changes back on its own
- I can confirm that doesn't appear to work....
- 10:29 AM Software Development: RE: Pinmux changes back on its own
- I was able to compile busybox (after making an empty syncfs() function in sync.c as a quick workaround), and here's w...
- 01:39 PM PCB Development: RE: Questions about my product version
- I got this:
>root@mityomapl138:~# dmesg | grep 'Part Number'
>MityOMAPL138: Part Number = 1810-DG-255-RC
So I ... - 01:22 PM PCB Development: RE: Questions about my product version
- Hector,
To determine the model of a specific module please refer to the label that is located on the bottom side o... - 01:14 PM PCB Development: RE: Questions about my product version
- During the linux boot, it should print out the model number of the module. Here is what my L138 prints out:...
- Hello everybody,
I requested for a MitySOM-1810F + PROFIBUS-development kit from Avnet, and I got kind of confused... - 08:51 AM Software Development: RE: Problems with the first time configuration
- Note the old filesystem has an outdated url for opkg. Angstrom moved their feeds to here: http://feeds.angstrom-dist...
06/01/2016
- 05:50 PM Software Development: RE: Problems with the first time configuration
- I changed it to the older toolchain and it works! , I will try to do the MDK updating
From: https://support.critic... - 05:01 PM Software Development: RE: Problems with the first time configuration
- Correct link to forum post: https://support.criticallink.com/redmine/boards/10/topics/2559?r=4113#message-4113
- 05:00 PM Software Development: RE: Problems with the first time configuration
- Note: If you're starting a new project, I recommend updating your filesystem to the latest MDK and using the newer to...
- 04:58 PM Software Development: RE: Problems with the first time configuration
- Hector Bojorquez wrote:
> Thanks again,
>
> I will check it with IT guys.
>
> I got in the MityDSP from the VM... - 04:39 PM Software Development: RE: Problems with the first time configuration
- Thanks again,
I will check it with IT guys.
I got in the MityDSP from the VM with *_ssh root@192.168.0.151_* in... - 03:21 PM Software Development: RE: Pinmux changes back on its own
- One difference with the busybox code is they seem to be taking pains to make sure their mmap is page aligned.
http... - 03:11 PM Software Development: RE: Pinmux changes back on its own
- You can download the latest busybox and cross compile it. Should be something like below assuming you've set the too...
- 03:00 PM Software Development: RE: Pinmux changes back on its own
- It looks like devmem is missing from the version of busybox (v1.19.4) included with the 2014-01-13 root file system i...
- 10:21 AM Software Development: RE: Pinmux changes back on its own
- Do you have the same problem using the devmem utilty? It also uses the /dev/mem interface. If it works perhaps you ...
- 10:18 AM Software Development: RE: Pinmux changes back on its own
- I've played around with it a bit more, and it seems the issues does not have to do specifically with PINMUX registers...
- 09:26 AM Software Development: RE: Pinmux changes back on its own
- Strange, the only time the pinmux should get modified is during u-boot initialization and during kernel boot. Otherw...
05/31/2016
- 02:15 PM Software Development: RE: Problems with the first time configuration
- Hector Bojorquez wrote:
> Hi again!,
FYI, if you want to link to attachments in redmine, the syntax is @attachment:... - 01:04 PM Software Development: RE: Problems with the first time configuration
- Hi again!,
Thanks Jonathan, It looks that it has already booted up in Linux +{Attached 1 Booting_up.jpg}+
I ha...
05/27/2016
- I'm trying to set up PINMUX5 at address 0x01C14134 to have EPWM1A on the output. It seems to take on the desired valu...
05/26/2016
- 09:48 AM Software Development: RE: Instructions to get going with the OMAP PWM
- Andrew Bean wrote:
> I'm trying to get EPWM1A running with the MityDSP-L138 module and MityDSP-L138 (F) Family Devel...
05/25/2016
- I'm trying to get EPWM1A running with the MityDSP-L138 module and MityDSP-L138 (F) Family Development Kit.
1) Is the... - 02:53 PM Software Development: RE: Problems with the first time configuration
- If this is the module that came with the devkit then it should boot into linux when powered on assuming you don't hit...
- 02:06 PM Software Development: RE: Problems with the first time configuration
- Hi Jonathan,
I'm using now TeraTerminal, my serial port is working OK and I got in the U-Boot prompt, I checked ...
05/24/2016
- 07:27 PM Software Development: RE: PRU_gpioToggle example fails sometimes
- So, I've been playing around with the example code more to try to get the interrupt wait() and clear() to work.
Th... - 02:00 PM Software Development: RE: PRU_gpioToggle example fails sometimes
- In @static int LOCAL_exampleInit ( unsigned short prunum )@ of PRU_gpioToggle.c we need to have...
- 11:42 AM Software Development: RE: PRU_gpioToggle example fails sometimes
- So this is strange. I modified the gpioToggle code to have the following:...
- 01:30 PM Software Development: RE: Problems with the first time configuration
- Hector Bojorquez wrote at https://support.criticallink.com/redmine/projects/arm9-platforms/activity?from=2016-05-24:
... - 01:20 PM Software Development: RE: Starter Guide: "Boot the MityDSP-L138 up into linux." - How?
- Hector, I'm going to respond in your other forum post.
https://support.criticallink.com/redmine/boards/10/topics/4825 - 12:05 PM Software Development: RE: Starter Guide: "Boot the MityDSP-L138 up into linux." - How?
- Hi everyone, I'm starting with the PROFIBUS development kit and I was trying to follow the starter guide until I came...
05/23/2016
- 11:11 PM Software Development: RE: PRU_gpioToggle example fails sometimes
- This seems to be the same as one of the issues that Jonathan Cormier observed in the topic that you linked. E.g., "gp...
- 10:30 PM Software Development: RE: PRU_gpioToggle example fails sometimes
- Andrew,
Another user was able to successfully run the demos on the MityDSP-L138, but perhaps they didn't test thin... - I'm having multiple issues with the PRU example PRU_gpioToggle. In short, it seems like some read/write operations to...
05/20/2016
- 05:10 PM Software Development: RE: Problems with the first time configuration
- Hi Jonathan,
I imagine that you always work with more experienced users :D , but I'm just starting with this kind... - 04:53 PM Software Development: RE: Problems with the first time configuration
- Hector,
Sorry about all this. I am going to see if someone can add some detail to the Quick start guide about ini... - 04:35 PM Software Development: RE: Problems with the first time configuration
- Thanks for the quick response,
??Running debug in this case has probably tried to run the program on the VM.... - 02:39 PM Software Development: RE: Problems with the first time configuration
- Hector Bojorquez wrote:
> Hi everyone!
>
> I have just acquired the PROFIBUS development kit from Critical Link, ... - Hi everyone!
I have just acquired the PROFIBUS development kit from Critical Link, I was trying to put it on follo...
05/13/2016
- 03:34 PM Software Development: RE: PRU svn authentication failed
- "Password for '(null)' GNOME keyring:" seemed suspect, so i searched on that.
I had to do the following, and then ... - 03:28 PM Software Development: RE: PRU svn authentication failed
- I pinged google just to make sure the internet connection is up. Here's what I get:
@
mitydsp@mitydsp-dev:~$ cd S... - 03:15 PM Software Development: RE: PRU svn authentication failed
- Bob Duke wrote:
> Andrew, I had no problems with this command:
> [...]
>
> Can you please try again and if you h... - 03:14 PM Software Development: RE: PRU svn authentication failed
- Andrew, I had no problems with this command:...
- 03:09 PM Software Development: RE: PRU svn authentication failed
- Found this TI wiki. It appears that you must use the username anonymous with a blank password.
http://processors.wi... - When running the following:
svn co https://gforge.ti.com/svn/pru_sw/trunk pru_sw
I get the message
"... Coul...
05/12/2016
- 10:38 AM Software Development: RE: Emulator stops working very often.
- We generally try to do as little as possible in main(). It should launch an initialization task and you would work f...
05/10/2016
- 02:48 PM Software Development: RE: Cannot run multiple times my ARM/DSP application
- Various small errors contributed to the problem. things seem to work better now. I can send & Recv 3 messages and I d...
05/09/2016
- 12:32 PM Software Development: RE: Cannot run multiple times my ARM/DSP application
- I think these are the files you need. Basically, just the HelloWorld files. Let me know if you need anything else.
- 11:52 AM Software Development: RE: Cannot run multiple times my ARM/DSP application
- Would it be possible for you to post a copy of your example code, including the BIOS configuration files?
If you w... - 11:48 AM Software Development: RE: Cannot run multiple times my ARM/DSP application
- I have something like this:
// Create the object used to send messages to the DSP
lpMessageOutbound = new tcIPC... - 11:30 AM Software Development: RE: Cannot run multiple times my ARM/DSP application
- I know this is an old thread, but I am having similar issues. This is the first time I have head about the "ReturnBu...
05/06/2016
- 08:41 AM Software Development: RE: iproute2 for SocketCAN with 3.2 Kernel
- Thanks. After running ip link set eth0 1000000, I can see the can0 interface listed.
The next step in the wiki is...
Also available in: Atom
Go to top
