Activity

From 07/15/2016 to 08/13/2016

03:27 PM Software Development: RE: Network Communication MitySOM Custom Kernel Configuration: I have both the L2_3Y8 and H4_3YA.. Attached is the config file for my 3YA. Dont think it really matters. Both error ... Brian Wentworth
02:25 PM Software Development: RE: Network Communication MitySOM Custom Kernel Configuration: Can you post your .config file?
Thanks
Jonathan Cormier Jonathan Cormier
02:17 PM Software Development: Network Communication MitySOM Custom Kernel Configuration: Hello,
I have a MitySOM dev board with the 5CSE-H4-3YA. I am able to use the pre-built binary SD card image for ne... Brian Wentworth
12:15 PM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot: Hi Dan
Thanks for this. I can try the image on Monday and report back results.
Can you provide a little detail... Stephen Snyder
11:56 AM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot: Hello Steve,
I've created an alpha SD card image that from my testing has fixed the i2c failures. The filesystem a... Daniel Vincelette

10:05 AM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board: Hi Dan,
The network stability problem has disappeared after removing the skews. Thanks for the suggestion!
I'll... Jared Kirschner

11:12 AM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board: Hi Jared,
Looking at the sockit dts(https://github.com/altera-opensource/linux-socfpga/blob/socfpga-4.1.22-ltsi-rt... Daniel Vincelette
10:38 AM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board: Hello Dan,
I've been performing more testing on the Altera 4.1.22 LTSI RT branch.
Physical setup: MitySOM 5CSX ... Jared Kirschner

10:30 AM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot: Hello Steve,
There was a bit of stability issue with the I2C interface to the HDMI transmitter IC. I thought my ne... Daniel Vincelette
09:43 AM FPGA Development: HDMI Output splash screen is intermittently displayed on boot: Hello,
I'm trying to run the HDMI output image provided on the wiki. I haven't modified anything just written the... Stephen Snyder
10:24 AM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board: Hi Jared,
Glad to hear that worked for you! If you run into trouble getting your defconfig/dts setup how you want ... Daniel Vincelette
09:40 AM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board: Hello Dan,
Thanks for pushing the dizzy (1.7) branch. I've successfully gotten to the same point you did in your f... Jared Kirschner

02:05 PM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board: Hi Jared,
Sorry for the delay.
I just pushed a dizzy(1.7) branch to our git repo: http://support.criticallink.c... Daniel Vincelette

03:27 PM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board: Hello Dan,
I proceeded to try to use Yocto to build the Altera 4.1.22 LTSI RT kernel based on your suggestions abo... Jared Kirschner

11:55 AM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board: Hello Jared,
That sounds like a perfect approach. For building the file system we do use yocto, which as you saw i... Daniel Vincelette
10:26 AM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board: Hello Dan,
I've been going through the instructions on the Wiki to get an SD card image of my creation working. I'... Jared Kirschner

03:01 PM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board: Hello Jared,
I did a quick test here and was able to boot altera's 4.1.22 ltsi rt kernel using the MitySOM-5CSX de... Daniel Vincelette

01:50 PM Software Development: Using PREEMPT_RT on MitySOM 5CSX Dev Board: Context: My company recently purchased some MitySOM 5CSX Development Boards and would like to use them on a current p... Jared Kirschner

Also available in: Atom

Go to top

Mity CPU Platforms » MitySOM-5CSX Altera Cyclone V