Mity CPU Platforms » MitySOM-5CSX Altera Cyclone V

08/12/2016

03:27 PM Software Development: RE: Network Communication MitySOM Custom Kernel Configuration

I have both the L2_3Y8 and H4_3YA.. Attached is the config file for my 3YA. Dont think it really matters. Both error ... Brian Wentworth

02:25 PM Software Development: RE: Network Communication MitySOM Custom Kernel Configuration

Can you post your .config file?
Thanks
Jonathan Cormier Jonathan Cormier

02:17 PM Software Development: Network Communication MitySOM Custom Kernel Configuration

Hello,
I have a MitySOM dev board with the 5CSE-H4-3YA. I am able to use the pre-built binary SD card image for ne... Brian Wentworth

12:15 PM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot

Hi Dan
Thanks for this. I can try the image on Monday and report back results.
Can you provide a little detail... Stephen Snyder

11:56 AM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot

Hello Steve,
I've created an alpha SD card image that from my testing has fixed the i2c failures. The filesystem a... Daniel Vincelette

08/11/2016

10:05 AM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board

Hi Dan,
The network stability problem has disappeared after removing the skews. Thanks for the suggestion!
I'll... Jared Kirschner

08/10/2016

11:12 AM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board

Hi Jared,
Looking at the sockit dts(https://github.com/altera-opensource/linux-socfpga/blob/socfpga-4.1.22-ltsi-rt... Daniel Vincelette

10:38 AM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board

Hello Dan,
I've been performing more testing on the Altera 4.1.22 LTSI RT branch.
Physical setup: MitySOM 5CSX ... Jared Kirschner

08/09/2016

10:30 AM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot

Hello Steve,
There was a bit of stability issue with the I2C interface to the HDMI transmitter IC. I thought my ne... Daniel Vincelette

09:43 AM FPGA Development: HDMI Output splash screen is intermittently displayed on boot

Hello,
I'm trying to run the HDMI output image provided on the wiki. I haven't modified anything just written the... Stephen Snyder

10:24 AM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board

Hi Jared,
Glad to hear that worked for you! If you run into trouble getting your defconfig/dts setup how you want ... Daniel Vincelette

09:40 AM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board

Hello Dan,
Thanks for pushing the dizzy (1.7) branch. I've successfully gotten to the same point you did in your f... Jared Kirschner

08/05/2016

02:05 PM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board

Hi Jared,
Sorry for the delay.
I just pushed a dizzy(1.7) branch to our git repo: http://support.criticallink.c... Daniel Vincelette

08/03/2016

03:27 PM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board

Hello Dan,
I proceeded to try to use Yocto to build the Altera 4.1.22 LTSI RT kernel based on your suggestions abo... Jared Kirschner

08/02/2016

11:55 AM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board

Hello Jared,
That sounds like a perfect approach. For building the file system we do use yocto, which as you saw i... Daniel Vincelette

10:26 AM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board

Hello Dan,
I've been going through the instructions on the Wiki to get an SD card image of my creation working. I'... Jared Kirschner

07/29/2016

03:01 PM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board

Hello Jared,
I did a quick test here and was able to boot altera's 4.1.22 ltsi rt kernel using the MitySOM-5CSX de... Daniel Vincelette

07/28/2016

01:50 PM Software Development: Using PREEMPT_RT on MitySOM 5CSX Dev Board

Context: My company recently purchased some MitySOM 5CSX Development Boards and would like to use them on a current p... Jared Kirschner