Project

General

Profile

Activity

From 07/24/2016 to 08/22/2016

08/22/2016

02:10 PM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
That's ok, thanks for the update Dan. Feel free to post an updated image anytime, even if you don't have a ton of te... Stephen Snyder
02:07 PM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
Steve,
I'm terribly sorry for the radio silence. Unfortunately I've been travelling for the past week so I haven't...
Daniel Vincelette
07:43 AM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
Hi Dan,
Any update on this? Have you been able to review the scope shots?
Best,
Steve
Stephen Snyder

08/17/2016

10:35 AM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
Hi Dan,
See attached. The index.txt file in the zip package describes each scope shot. Let me know what other me...
Stephen Snyder

08/16/2016

03:35 PM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
Hi Dan,
Sure thing, I can take these shots first thing in the morning and get them back to you.
Steve
Stephen Snyder
01:12 PM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
Hi Steve,
Hmm good point that it you've already vetted the monitor you're using. Seeing as you're getting the disp...
Daniel Vincelette
07:39 AM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
Hi Dan,
Thanks for the detail on the I2C fix.
I've tested on two monitors. On one of them, I am certain it sup...
Stephen Snyder
03:05 PM Software Development: RE: Network Communication MitySOM Custom Kernel Configuration
Jonathan/Dan,
Solved.... Yes, that was the difference in the two kernels, ipv6 was being built as a module in the ...
Brian Wentworth

08/15/2016

04:12 PM Software Development: RE: Network Communication MitySOM Custom Kernel Configuration
Hi Brian,
I've updated the wiki for building the kernel and have added steps for building the modules, it can be f...
Daniel Vincelette
03:20 PM Software Development: RE: Network Communication MitySOM Custom Kernel Configuration
Both udp6/tcp6 and '::' points to an error with ipv6 support. Looking at your .config file shows ipv6 being built as... Jonathan Cormier
03:05 PM Software Development: RE: Network Communication MitySOM Custom Kernel Configuration
Jonathan,
So I built a new kernel setting the base configuration as mitysom5csx_devkit_defconfig without doing the...
Brian Wentworth
03:11 PM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
Hi Steve,
Sorry for the delay, I was travelling Friday afternoon.

To fix for the I2C issue was that I resample...
Daniel Vincelette
10:45 AM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
Hi Dan,
This image doesn't show anything on my monitor. Upon first booting it, right after the console printed "S...
Stephen Snyder

08/12/2016

03:27 PM Software Development: RE: Network Communication MitySOM Custom Kernel Configuration
I have both the L2_3Y8 and H4_3YA.. Attached is the config file for my 3YA. Dont think it really matters. Both error ... Brian Wentworth
02:25 PM Software Development: RE: Network Communication MitySOM Custom Kernel Configuration
Can you post your .config file?
Thanks
Jonathan Cormier
Jonathan Cormier
02:17 PM Software Development: Network Communication MitySOM Custom Kernel Configuration
Hello,
I have a MitySOM dev board with the 5CSE-H4-3YA. I am able to use the pre-built binary SD card image for ne...
Brian Wentworth
12:15 PM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
Hi Dan
Thanks for this. I can try the image on Monday and report back results.
Can you provide a little detail...
Stephen Snyder
11:56 AM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
Hello Steve,
I've created an alpha SD card image that from my testing has fixed the i2c failures. The filesystem a...
Daniel Vincelette

08/11/2016

10:05 AM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board
Hi Dan,
The network stability problem has disappeared after removing the skews. Thanks for the suggestion!
I'll...
Jared Kirschner

08/10/2016

11:12 AM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board
Hi Jared,
Looking at the sockit dts(https://github.com/altera-opensource/linux-socfpga/blob/socfpga-4.1.22-ltsi-rt...
Daniel Vincelette
10:38 AM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board
Hello Dan,
I've been performing more testing on the Altera 4.1.22 LTSI RT branch.
Physical setup: MitySOM 5CSX ...
Jared Kirschner

08/09/2016

10:30 AM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
Hello Steve,
There was a bit of stability issue with the I2C interface to the HDMI transmitter IC. I thought my ne...
Daniel Vincelette
09:43 AM FPGA Development: HDMI Output splash screen is intermittently displayed on boot
Hello,
I'm trying to run the HDMI output image provided on the wiki. I haven't modified anything just written the...
Stephen Snyder
10:24 AM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board
Hi Jared,
Glad to hear that worked for you! If you run into trouble getting your defconfig/dts setup how you want ...
Daniel Vincelette
09:40 AM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board
Hello Dan,
Thanks for pushing the dizzy (1.7) branch. I've successfully gotten to the same point you did in your f...
Jared Kirschner

08/05/2016

02:05 PM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board
Hi Jared,
Sorry for the delay.
I just pushed a dizzy(1.7) branch to our git repo: http://support.criticallink.c...
Daniel Vincelette

08/03/2016

03:27 PM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board
Hello Dan,
I proceeded to try to use Yocto to build the Altera 4.1.22 LTSI RT kernel based on your suggestions abo...
Jared Kirschner

08/02/2016

11:55 AM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board
Hello Jared,
That sounds like a perfect approach. For building the file system we do use yocto, which as you saw i...
Daniel Vincelette
10:26 AM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board
Hello Dan,
I've been going through the instructions on the Wiki to get an SD card image of my creation working. I'...
Jared Kirschner

07/29/2016

03:01 PM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board
Hello Jared,
I did a quick test here and was able to boot altera's 4.1.22 ltsi rt kernel using the MitySOM-5CSX de...
Daniel Vincelette

07/28/2016

01:50 PM Software Development: Using PREEMPT_RT on MitySOM 5CSX Dev Board
Context: My company recently purchased some MitySOM 5CSX Development Boards and would like to use them on a current p... Jared Kirschner
 

Also available in: Atom

Go to top
Add picture from clipboard (Maximum size: 1 GB)