Project

General

Profile

Activity

From 09/29/2016 to 10/28/2016

10/26/2016

10:07 AM Software Development: RE: 8TB USB Mass Storage device being unreadable
So this might be a red herring but in the pi's dmesg it has the following line, which the MitySOM doesn't:... Daniel Vincelette

10/25/2016

11:10 AM Software Development: RE: 8TB USB Mass Storage device being unreadable
Hello Dan,
Yes. I tested with 8 and 16GB USB sticks as well and it works just fine, so the culprit might be in the...
Dominik Marszk
09:21 AM Software Development: RE: 8TB USB Mass Storage device being unreadable
Hello Dominik,
Have you tried a quick test of using a smaller flash drive with the MitySOM? Just to see if we can ...
Daniel Vincelette
09:49 AM Software Development: RE: SPI on MitySOM
Thanks so much. That info provided the missing link for the Device Tree
--Brian
Brian Wentworth

10/24/2016

05:20 AM Software Development: RE: 8TB USB Mass Storage device being unreadable
The kernel used on MitySOM is 3.16.0. Dominik Marszk
05:12 AM Software Development: 8TB USB Mass Storage device being unreadable
Hello!
I'm trying to use an USB device enumerating as a 8TB Mass Storage with 5CSX-H6-42A kit. It's connected thro...
Dominik Marszk

10/12/2016

03:33 AM Software Development: RE: Increase POSIX message queue size
> Just a suggestion: you could add a startup script that does the ulimit -q on startup so every time the system is bo... Mladen Kerep

10/07/2016

01:26 PM Software Development: RE: Increase POSIX message queue size
Understood, our IT department is still currently working on seeing what is going on with the certs
Just a suggesti...
Daniel Vincelette
06:47 AM Software Development: RE: Increase POSIX message queue size
> I was able to recreate this issue. It looks like pam wasn't enabled in the yocto build when the file system was bui... Mladen Kerep

10/06/2016

05:23 PM Software Development: RE: Increase POSIX message queue size
I was able to recreate this issue. It looks like pam wasn't enabled in the yocto build when the file system was built... Daniel Vincelette
06:14 AM Software Development: RE: Increase POSIX message queue size
FYI: In this particular web app, you can escape / quote code using the "pre" or the "code" HTML tag e.g.:
pre tag...
Michael Williamson
02:21 AM Software Development: RE: Increase POSIX message queue size
No, '!' are my faults, ie. due to my poor knowledge about formatting.
The lines start with '*', but then text format...
Mladen Kerep
04:16 PM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board
Glad to hear that was the solution!
Dan
Daniel Vincelette
12:27 PM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board
Problem solved! Thank you so much.
I'm now carefully stepping through adding additional relevant nodes from the Mi...
Jared Kirschner

10/05/2016

08:09 PM Software Development: RE: Increase POSIX message queue size
Hello,
One quick question, are the ! before the * meant to be there?
I will try to reproduce this issue tomorro...
Daniel Vincelette
08:04 PM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board
You are also correct in using the uBootMMCEnv.txt from our git repo. The other one is a much older version, which sho... Daniel Vincelette
08:00 PM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board
Jared,
I was able to reproduce your problem and I've found the issue. Between our 3.16 kernel and the 4.1.22 kerne...
Daniel Vincelette
05:38 PM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board
Hi Jared,
From what you've seen it looks to me to be an issue with the 4.1.22 kernel. I've looked at qsys/dts and ...
Daniel Vincelette
05:31 PM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board
Additional information:
I've stepped through the u-boot process manually (after parsing the differences between th...
Jared Kirschner
02:58 PM Software Development: RE: Accessing git repositories when behind firewall
Sorry, it was not clear that the https access is _new_ :)
Not sure about the gethostbyname failure... support.crit...
Tim Iskander
10:29 AM Software Development: RE: Accessing git repositories when behind firewall
> The URL for each repository is formed from @https://support.criticallink.com/git/<repos.git>@
It was my 1st guess,...
Mladen Kerep
08:20 AM Software Development: RE: Accessing git repositories when behind firewall
https access has been enabled for Critical Link repositories on https://support.criticallink.com
The URL for each re...
Tim Iskander

10/04/2016

09:08 AM Software Development: Increase POSIX message queue size
I've rebuild the linux kernel acc. "Building the Linux Kernel Wiki":https://support.criticallink.com/redmine/projects... Mladen Kerep
08:35 AM Software Development: Accessing git repositories when behind firewall
The instructions on the wiki use the "git protocol":https://git-scm.com/book/tr/v2/Git-on-the-Server-The-Protocols fo... Mladen Kerep

10/03/2016

02:54 PM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board
Hi Dan,
Our hardware engineer just noted a significant difference between two versions of uBootMMCEnv.txt listed o...
Jared Kirschner
12:16 PM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board
Hi Dan,
Requested files attached; let me know if I'm missing anything (e.g., FPGA source code).
Also, not sure ...
Jared Kirschner
12:04 PM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board
Hi Jared,
Would you mind posting your .qsys file and .dts?
I'll take a quick sanity check,
Thanks
Dan
Daniel Vincelette

09/30/2016

12:02 PM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board
Addendum: any single PIO (0 through 3) can be enabled in the DTS and the system will boot, but including more than on... Jared Kirschner
08:13 AM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board
Hi Dan,
I did a bit more experimenting with including a subset of the hps_lw_bus sub-nodes. I confirmed with the V...
Jared Kirschner

09/29/2016

09:13 AM Software Development: RE: Ethernet not coming up
I tested the crystal with an oscilloscope and found the crystal had gone bad. After replacing the crystal everything ... Michael Ruen
12:07 AM Software Development: RE: Ethernet not coming up
Hi Michael,
Sorry for the delayed response.
Would you mind running ethtool and posting the result?...
Daniel Vincelette
12:21 AM Software Development: RE: SPI on MitySOM
Hi Brian,
The following device tree uses the SPIM perpherials: http://support.criticallink.com/gitweb/?p=linux-soc...
Daniel Vincelette
 

Also available in: Atom

Go to top
Add picture from clipboard (Maximum size: 1 GB)