Activity
From 05/18/2014 to 06/16/2014
06/16/2014
- BD 10:08 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: USB2.0 Host on MityDSP-L138F
- Hannes,
Can you upload your kernel .config file? We have seen similar problems on our 335x product line that were traced to an improper kernel configuration.
Thanks,
-Bob
- Hello everyone,
I'm trying to use the USB2-OTG on the MityDSP-L138F as a USB2 Host to connect a few USB-Mass Storage devices.
I'm using the current MDK (2014-01-13) on the supplied Development Board (industrial-i/o). I changed in a...
06/13/2014
- Posting on behalf of a customer and for future reference as well:
1) How do I access the +5V I2C current monitor IC interface on the Critical Link development board, WITHOUT using i2cSet and i2cGet? I do not have these programs instal...
06/10/2014
-
07:55 PM
MitySOM-5CSX Altera Cyclone V
Software Development: RE: Reading memory into a file
- Actually don't worry about it.
We managed to solve it.
Thanks,
Jack
06/09/2014
-
01:46 PM
MitySOM-5CSX Altera Cyclone V
Software Development: RE: Reading memory into a file
- Hi Greg,
Any update on this?
Did you guys manage to resolve the issue?
Thanks,
Jack
06/06/2014
- UF 06:36 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP HelloWorld
- Flashing the 2014 MDK files solved all the problems. For some reason installing the U-boot bricked my board, but following the wiki on "reprogramming a dead board" fixed it.
I have another question. Is there a sample Makefile for buil... - JC 08:37 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP HelloWorld
- The filesystem and kernel that ship preprogrammed on the L138 is quite old. You should have more luck if you flash the u-boot, kernel, and filesystem included in the 2014-01-13 MDK.
Installing U-boot:
https://support.criticallink.co... - BD 10:02 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Login uncorrect from serial connection and correct from ethernet connetion
- Silvano, as a test, you can rename the securetty file which should eliminate any restrictions on root logins.
- JC 09:51 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Login uncorrect from serial connection and correct from ethernet connetion
- My securetty file has following at the top of the file which i didn't see in the file you posted.
- JC 09:49 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Login uncorrect from serial connection and correct from ethernet connetion
- I updated to the latest filesystem and got similar results to my previous post.
- JC 08:54 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Login uncorrect from serial connection and correct from ethernet connetion
- Testing this on a L138 at my desk. I am able to login as root over ssh using any password including an empty password. But am having no trouble logging in over the serial port.
After setting a password I can no longer login using ... - SB 08:47 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Login uncorrect from serial connection and correct from ethernet connetion
- Is there something wrong?
Any idea? - SB 08:19 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Login uncorrect from serial connection and correct from ethernet connetion
- Attached you can find:
- a startup screenshot;
- the content of /etc/ folder;
- the file securetty.
Let me know, thanks.
Silvano - SB 08:01 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Login uncorrect from serial connection and correct from ethernet connetion
- From serial I do the access without password but when I write "root" at login it tells me "login incorrect".
From ethernet cable I do the access with "root" and password "mitydsp" but I do not set anything. - TI 08:00 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Login uncorrect from serial connection and correct from ethernet connetion
- Normally, this is not a problem. can you check if there is an /etc/securetty file ( http://www.faqs.org/docs/securing/chap5sec41.html )
or log in over the network and then try to log in from the serial console and check the log files in... - MW 07:58 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Login uncorrect from serial connection and correct from ethernet connetion
- Did you set a password for the root shell? Normally there is no password by default. How did you set the password?
-Mike
- SB 07:57 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Login uncorrect from serial connection and correct from ethernet connetion
- Does anybady has any suggestion?
It is important for me, not only to have the access from ethernet, but also from serial cable...
06/05/2014
- I'm trying to setup a development environment for the MityDSP-L138 to write DSP code.
I got the DSP HelloWorld test to work, but with a few blocking issues:
1. I had to use the HelloWorld program downloaded from the website. My own... - Dear all,
I have a strange problem.
I hava my MityDSP connected to my pc through both a serial cable and a ethernet cable.
The MityDSP works good. I installed the kernel on the SPI-FLASH and the file system in .jffs2 format on the... - SB 06:24 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Kernel loading module problems MityDSP and FPGA configuration
- I have corrected all the CRC error rounding the filesize parameters to the correct values.
I have also recompiled the kernel modifyind a little our configuration baseboard-industrialio.c file beacuse we noticed that there was one error ...
06/04/2014
- MW 08:57 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Kernel loading module problems MityDSP and FPGA configuration
- The filessize should be rounded to 0x800 bytes, which I think should be 0x150C800, not 0x150E000.
-Mike
- SB 08:49 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Kernel loading module problems MityDSP and FPGA configuration
- Dear all
As I got a lot of CRC errors, here are some question:
1 My .jffs2 file is about 21 MB (22070432 bytes) which corresponds to 0x150C4A0. To copy the filesystem on the target I use the following commands, right?
u-Boot> mw.b 0...
06/03/2014
- SB 08:48 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Kernel loading module problems MityDSP and FPGA configuration
- Dear Michael,
I tried to run the command you told me. Everything was ok until I copied the fpga_ctrl file on the target machine as you can see in the attached file fpga_ctrl_ontarget.png.
But when I run the "insmod" command I got wha...
06/01/2014
- AS 11:49 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: How to run bin application via u-boot?
- > If I knew the answer to using a bin file beyond "go", as you asked before, I would have told you before. :^)
I'm Sorry for my insistence.
> ...
No, the size didn't change much (debug out size is 3.06 MB and release out size is 2.8... - MW 10:19 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: How to run bin application via u-boot?
- Hi Ahmed,
If I knew the answer to using a bin file beyond "go", as you asked before, I would have told you before. :^)
So you set the --symdebug:none option and the filesystem grew on your Release build from 2MB to 3MB? That's odd... - AS 04:39 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: How to run bin application via u-boot?
- Hi Mike,
I have set the compiler option to "--symdebug:none" and the size of the .out file generated is also 3 MB.
Is there another option to minimize the size of out file? and as i asked you before is there a Uboot command to execute ...
05/30/2014
- MW 11:02 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Kernel loading module problems MityDSP and FPGA configuration
- Did you also rebuild the FPGA drivers? They are not in-tree in the kernel git repository. They are located in the board support package in the MityDSP Developer's Kit.
Let's start with this:
On the build machine: - SB 10:40 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Kernel loading module problems MityDSP and FPGA configuration
- Dear Michael,
let me know if my way of working is right:
1) I wrote my own baseboard-industrialio.c file as reported in the firts post of this discussion.
2) I recompiled the kernel as reported in https://support.criticallink.com/re... - MW 07:30 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Kernel loading module problems MityDSP and FPGA configuration
- Hello,
We have many customers able to load and run modules with the MityDSP-L138, it's not obvious what the issue is here. I am suspicious that there may have been a problem with the filesystem installation / update (either the modul... - SB 04:00 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Kernel loading module problems MityDSP and FPGA configuration
- Dear all,
attached you can find a text (LinuxLoading.txt) file where I captured the entire boot together with the screenshot where "Failed" occurs (FailuresLoadingKernel.png).
I also run "uname -a" and the results are in the text fil... - AS 03:45 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: How to run bin application via u-boot?
- Michael Williamson wrote:
> Just to confirm, you have the compiler option "--symdebug:none" in your release compile and link options?
> ...
Thanks Mike.
Unfortunately I didn't check this compiler option and now It's my weekend so I'll...
05/29/2014
- AB 04:29 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: How to run bin application via u-boot?
- Ahmed,
I believe Mike was suggesting that you build the application as a "release" version without any debugging and see what the resulting application file size is?
I.E. if it was 5MB in debug maybe it's 2MB in release, thus no ne... - MW 04:04 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: How to run bin application via u-boot?
- Just to confirm, you have the compiler option "--symdebug:none" in your release compile and link options?
-Mike
- AS 03:51 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: How to run bin application via u-boot?
- Hi Mike,
I have tried what you mentioned and it didn't work.
I'll wait your trial.
Thanks in advance. - MW 03:02 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: How to run bin application via u-boot?
- I think you need to strip the .out file (make a release version that removes the debugging information).
If I get a second I will try it out.
-Mike
- AB 01:48 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: How to run bin application via u-boot?
- Posting some previous direct followup e-mails from the customer.
I have followed the steps of the Starterware wiki ([[https://support.criticallink.com/redmine/projects/arm9-platforms/wiki/StarterWare]]) and I could run elf (UART_MITY_... - MW 10:47 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Kernel loading module problems MityDSP and FPGA configuration
- Hi,
Can you please capture the entire boot up on the console to a text file and set it over?
Or at least run "uname -a" and report the results?
-Mike
- SB 10:38 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Kernel loading module problems MityDSP and FPGA configuration
- Dear Bob,
when I try to load the modules with "insmod fpga_ctrl.ko" I get an error with "Function non implemented" as explanation.
I also found on internet that the insmod error message is caused by either a kernel lacking module sup... - BD 09:30 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Kernel loading module problems MityDSP and FPGA configuration
- Hi Silvano,
Jon was referring to the kernel modules explicitly. The modules need to be installed in your target root filesystem (/lib/$kernelversion) after you copy over the kernel.
The page you reviewed, does mention this, but it'... - SB 08:47 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Kernel loading module problems MityDSP and FPGA configuration
- I report before that I recompile the kernel every time I made a modificatuon on the baseboard file.
In fact the link you report me is cited by me in my first message.
Maybe there is something wrong in the file or in the compiling.
Cou... - JC 08:24 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Kernel loading module problems MityDSP and FPGA configuration
- Its hard to tell from those error messages whats going on but have you tried recompiling the kernel modules when you made changes to the kernel?
See https://support.criticallink.com/redmine/projects/arm9-platforms/wiki/FPGA_Core_Devic... - Hello everybody.
I am Silvano Bertoldo, I mainly work on the software side of MityDSP and I have a big problem about the linux kernel I am not able to solve. I am very grateful if you can support me or forward the present email to a s... - JC 09:53 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Compiler does not run in VM
- Also our vm does come with the toolchain installed. I'm unsure why you were unable to locate it.
Try looking in /usr/local/oecore-i686
The instructions seem to be missing that you need to run @. /usr/local/oecore-i686/environment-s... - MW 09:29 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Compiler does not run in VM
- Yes. You need to run the 32-bit version in the VM if your VM is a 32-bit architecture.
on your VM type "uname -a". It should tell you the version of the VM architecture.
-Mike - Hello- I'm new to the MityDSP platform and I am having trouble getting the development environment working. I have imported the VM into VirtualBox, and can run the VM. I'm trying to get the environment going for the L138F (ARM9). I fo...
05/28/2014
- Hi everyone,i have MityARM1808F.
I could use "bootelf" command[ex: bootelf 0xc0700000] to run any app.out,but the size of .out format is usually large(in my case is about 5 Mega byte which is too large to be saved on SPI flash with FPGA... - AS 08:54 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: UPP ISR is not called
- Finally i could solve this issue by adding the following code :
asm(" mrc p15, #0, r0, c1, c0, #0\n\t"
" orr r0, r0, #0x00002000\n\t"
" mcr p15, #0, r0, c1, c0, #0\n\t");
before calling BIOS_start function.
...
05/23/2014
- JC 01:24 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: High Latency for GPIO Interrupts in 3.2 Kernel
- Ok thanks.
Commit pushed. http://support.criticallink.com/gitweb/?p=linux-mityarm-335x.git;a=commit;h=39e9cebe98e56662e48d6f70f39765347ef2974b - MK 01:06 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: High Latency for GPIO Interrupts in 3.2 Kernel
- Yes, it is working.
Thanks. - JC 01:03 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: High Latency for GPIO Interrupts in 3.2 Kernel
- Hi Michael,
Did you get a chance to check this out?
05/22/2014
- JC 08:56 AM MitySOM-5CSX Altera Cyclone V Software Development: RE: annoying problem with nfs root
- Note that the patch is for the 9021 but since we are seeing similar problems with the 9031 it seems safe to assume it affects both hardware.
- JC 08:55 AM MitySOM-5CSX Altera Cyclone V Software Development: RE: annoying problem with nfs root
- http://lists.infradead.org/pipermail/barebox/2013-February/012712.html
- JC 08:47 AM MitySOM-5CSX Altera Cyclone V Software Development: RE: annoying problem with nfs root
- Looks like if you disable the Asym_Pause support then the phy driver starts working as expected
drivers/net/phy/micrel.c
05/21/2014
- BD 06:35 PM MitySOM-5CSX Altera Cyclone V Software Development: RE: future plans for kernel and yocto project
- Hello Andrea,
Answer 1: We have moved our internal development to Yocto (dora) and our general plan is to use the Yocto infrastructure in the future. We have not started updates for daisy. We'd like to see any patches required for dai...
05/19/2014
- AS 04:43 PM MityDSP-L138 (ARM9 Based Platforms) FPGA Development: RE: Programming FPGA Flash using IMPACT
- Thanks Michael,
I shall follow the steps in the link you mentioned and let you know results.