Project

General

Profile

Activity

From 01/06/2014 to 02/04/2014

02/03/2014

03:55 PM Software Development: Yocto Plug-In Python.exe Error
Posting on behalf of a customer:... Alexander Block

01/30/2014

10:01 AM FPGA Development: RE: Ethernet
Edited my response. Good eye Dave. Thanks! Gregory Gluszek
09:31 AM FPGA Development: RE: Ethernet
Greg,
Only 2 "e"s in setenv, not three... Jack probably knows that, but just to be clear...
Dave
David Rice
09:10 AM FPGA Development: RE: Ethernet
Hi Jack,
Follow these steps to correct the ethernet:
1. Break into u-boot by resetting the system and hitting ...
Gregory Gluszek

01/29/2014

06:48 PM FPGA Development: RE: Ethernet Rev B
Hi,
I just received your rev B module. We noticed that the ethernet doesn't work on this revision at all. Is there...
Anonymous

01/27/2014

12:56 PM FPGA Development: RE: Load FPGA Timeout Error
Hi Jack,
I'm not sure what else to try other than trying to program the FPGA through a JTAG pod, which I believe y...
Daniel Vincelette

01/24/2014

01:57 PM FPGA Development: RE: Load FPGA Timeout Error
Hi Dan,
I did what Adam suggested and it made no difference. I tried it without anything plugged in and still noth...
Anonymous
01:21 PM FPGA Development: RE: Load FPGA Timeout Error
Currently I do not believe that is the case, seeing as this problem is happening in both uboot and linux.
Have you...
Daniel Vincelette
12:28 PM FPGA Development: RE: Load FPGA Timeout Error
Could this be a OS issue that's causing it?
Can some one direct me the exact link where I can download the img fil...
Anonymous

01/22/2014

03:37 PM FPGA Development: RE: Load FPGA Timeout Error
Your MSEL is currently 00000. Try changing S100-position3 to OFF to get an MSEL[4:0] of 00100. This will change the ... Adam Dziedzic
03:11 PM FPGA Development: RE: Load FPGA Timeout Error
Looking through the uboot source code it seems that the HPS is not able to set the FPGA into a reset mode. Which coul... Daniel Vincelette
02:57 PM FPGA Development: RE: Load FPGA Timeout Error
correct Anonymous
02:56 PM FPGA Development: RE: Load FPGA Timeout Error
Is the following the full error you received?... Daniel Vincelette
02:34 PM FPGA Development: RE: Load FPGA Timeout Error
Yes Anonymous
02:33 PM FPGA Development: RE: Load FPGA Timeout Error
was this from the **run fpgaload**? Daniel Vincelette
02:31 PM FPGA Development: RE: Load FPGA Timeout Error
Hi Dan,
I got an error: Failed with error code -1.
Jack
Anonymous
02:29 PM FPGA Development: RE: Load FPGA Timeout Error
Hi Jack,
This needs to be run during uboot, which you get to by pressing any key during the first 5 seconds of sta...
Daniel Vincelette
02:13 PM FPGA Development: RE: Load FPGA Timeout Error
Hi Dan,
The Linux OS on the board doesn't have run and saveenv. I tried to update it, but it doesn't have the apt-...
Anonymous
01:33 PM FPGA Development: RE: Load FPGA Timeout Error
... Daniel Vincelette
12:59 PM FPGA Development: RE: Load FPGA Timeout Error
Hi Dan,
Regarding the uboot procedure, I have never worked with uboot before and the instructions on rocketboard i...
Anonymous
12:33 PM FPGA Development: RE: Load FPGA Timeout Error
Hi Adam,
I'm not sure what the default positions for the MSEL or which of the switches on board are for the MSEL. ...
Anonymous
12:23 PM FPGA Development: RE: Load FPGA Timeout Error
Hi Jack,
Please check the MSEL dip switches. These should be set to FPPx16 or FPPx32 for the FPGA Manager to be a...
Adam Dziedzic
12:07 PM FPGA Development: RE: Load FPGA Timeout Error
Hi Dan,
The same issue still occurs after power cycling.
I'm wondering if it's a hardware issue.
Jack
Anonymous
10:43 AM FPGA Development: RE: Load FPGA Timeout Error
Hi Jack,
We have not seen this issue yet. If you power cycle the board did this issue still occur?
Dan
Daniel Vincelette

01/20/2014

05:19 PM FPGA Development: Load FPGA Timeout Error
Hi,
I just got back from vacation and tried to run my board and ran into a problem.
I tried to load rbf file as...
Anonymous

01/09/2014

08:50 AM FPGA Development: RE: I/O voltage
Thanks, very useful info. Will give it a try over the next couple of weeks.
Nigel.
Nigel Doe

01/08/2014

04:57 PM FPGA Development: RE: I/O voltage
Hi Nigel,
Below you will find the details to support additional IO standards. I believe this covers all the neces...
Adam Dziedzic
01:53 PM FPGA Development: RE: I/O voltage
Any update on whether the dev kit can be configured for 3.3v I/O?
Thanks,
Nigel.
Nigel Doe
 

Also available in: Atom

Go to top
Add picture from clipboard (Maximum size: 1 GB)