Mity CPU Platforms » MitySOM-5CSX Altera Cyclone V

06/21/2016

MS 03:45 AM Software Development: RE: How to add aditional HPS GPIO's

Hi Alex,
Still a few misnumbered things in the above post.
Anyway, removing the switches from the DTS means that the GPIOs don't go to high impedance any more, and whatever I set them to in uBoot persists, but I still can't control... Matthew Schubert

06/20/2016

AB 01:15 PM FPGA Development: RE: HDMI Output and Quartus Versions

Steve,
We have successfully rebuilt the "HDMI example":https://support.criticallink.com/redmine/projects/5csxbase/wiki/HDMI_Output using Quartus 14.1 however you will require a license to support the VIP Suite (Video and Image Process... Alexander Block

SS 11:07 AM FPGA Development: HDMI Output and Quartus Versions

Hi,
I noticed that the HDMI Output example you've posted was done in Quartus 15.1 but the VM with the toolchain installed is still on Quartus 14.x. What would you recommend for someone deriving a project from the HDMI example? Shoul... Stephen Snyder

AB 01:10 PM Software Development: RE: How to add aditional HPS GPIO's

Maetthew,
Good catch. Apparently when I did the mapping I started off by one. We have updated the post above to have the correct mapping and also the associated wiki page (https://support.criticallink.com/redmine/projects/mityarm-5cs/... Alexander Block

MS 02:09 AM Software Development: RE: How to add aditional HPS GPIO's

I have noticed that in the DTS the switches are now on the GPIOs that I want to use:
http://support.criticallink.com/gitweb/?p=linux-socfpga.git;a=blob;f=arch/arm/boot/dts/socfpga_mitysom5csx_devkit.dts;hb=refs/heads/socfpga-3.16
I s... Matthew Schubert

06/19/2016

MS 11:26 PM Software Development: RE: How to add aditional HPS GPIO's

I'm having some issues setting GPIO37, 40 and 41 from within Linux.
Firstly, in the instructions above, you mention that GPIO29 to GPIO57 are mapped to gpio198 to gpio226, but then go on to say that GPIO49 corresponds to gpio217. Shou... Matthew Schubert

05/24/2016

AA 06:36 AM Software Development: RE: USB on MitySOM-5CSx Development Kit

i used you git repo and compiled using poky toolchain
/usr/lib/git-core/git-ls-remote git://support.criticallink.com/home/git/linux-socfpga.git
a79928cfd59f4b53ee568b25d232a807ea164271 refs/heads/socfpga-3.11
619f7bd69dc688... aggelis aggelis

05/23/2016

DV 09:21 AM Software Development: RE: USB on MitySOM-5CSx Development Kit

Hello,
I see from your defconfig that you are using the 3.12 kernel, is this from our git repository or is this Altera's LTSI kernel?
We do have USB OTG working with the 5CSx, in our "3.16":http://support.criticallink.com/gitweb/?... Daniel Vincelette