Activity
From 12/24/2018 to 01/22/2019
01/17/2019
- 09:32 AM MitySOM-5CSX Altera Cyclone V Software Development: RE: Second PHY MDIO interface
- Dan, thanks for your feedback. Lesson learned: Always rebuild the preloader.
That fixed my MDIO issue.
Regarding t...
01/14/2019
- 05:55 PM MitySOM-5CSX Altera Cyclone V Software Development: RE: RGMII pad skew on KSZ9031
- Thanks for the reply Mike. I'll talk to the software team and see if VxWorks resets the PHY. If not, then we will try...
- 11:22 AM MitySOM-5CSX Altera Cyclone V Software Development: RE: RGMII pad skew on KSZ9031
- Are you using uBoot to boot VxWorks?
I don't think there is enough space in the preloader to include the MDIO driv... - 04:10 PM MitySOM-5CSX Altera Cyclone V Software Development: RE: Second PHY MDIO interface
- Hi Vidar,
It looks like you are using Critical Link's 4.9 branch, is that correct?
Have you rebuilt and updated...
Hi
I have added a second PHY to my board and connected it through the FPGA IO. I am using HPS EMAC0 and have added...
01/13/2019
- We've got a custom board which is based on CriticalLink's baseboard. The PHY is the 9031. Try as we might to maintain...
01/03/2019
- 01:35 PM MitySOM-5CSX Altera Cyclone V Software Development: RE: MitySOM-5CSX read-only Linux
- Thanks a lot Mike.
That does seem to setup the filesystem as read-only, and is quite a simple solution.
01/02/2019
- Hi
After updating my dts/dtb file I have an issue with the device tree generation. When booting the board I get a lo... - 08:27 AM MitySOM-5CSX Altera Cyclone V Software Development: RE: LinuxPTP: 1PPS output is running at 0.1Hz
- Theses issues are related to the stmmac driver.
See user forum: https://sourceforge.net/p/linuxptp/mailman/linuxptp-...
Also available in: Atom
Go to top
