UBIFS Nand Boot » uEnv-512mb-nand.txt
1 |
autoload=no |
---|---|
2 |
baudrate=115200 |
3 |
bootargs_defaults=setenv bootargs console=${console} ${optargs} |
4 |
bootcmd=if mmc rescan; then echo SD/MMC found on device ${mmc_dev};if run loadbootenv; then echo Loaded environment from ${bootenv};run importbootenv;fi;if test -n $uenvcmd; then echo Running uenvcmd ...;run uenvcmd;fi;if run mmc_load_uimage; then run mmc_args;bootm ${kloadaddr};fi;fi;run nand_boot; |
5 |
bootdelay=3 |
6 |
bootenv=uenv.txt |
7 |
bootfile=uImage |
8 |
console=ttyO0,115200n8 |
9 |
ethact=cpsw |
10 |
importbootenv=echo Importing environment from mmc ...; env import -t $loadaddr $filesize |
11 |
ip_method=none |
12 |
kloadaddr=0x80007fc0 |
13 |
loadaddr=0x82000000 |
14 |
loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv} |
15 |
mmc_args=run bootargs_defaults;setenv bootargs ${bootargs} root=${mmc_root} rootfstype=${mmc_root_fs_type} ip=${ip_method} |
16 |
mmc_boot=run mmc_args; run mmc_load_uimage; bootm ${kloadaddr} |
17 |
mmc_dev=0 |
18 |
mmc_load_uimage=fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile} |
19 |
mmc_root=/dev/mmcblk0p2 rw |
20 |
mmc_root_fs_type=ext3 rootwait |
21 |
nand_args=run bootargs_defaults;setenv bootargs ${bootargs} root=${nand_root} noinitrd rootfstype=${nand_root_fs_type} ip=${ip_method} |
22 |
nand_boot=echo Booting from nand ...; run nand_args; nandecc hw 1; nand read.i ${kloadaddr} ${nand_src_addr} ${nand_img_siz}; bootm ${kloadaddr} |
23 |
nand_img_siz=0x500000 |
24 |
nand_root=ubi0:rootfs rw ubi.mtd=8,4096 |
25 |
nand_root_fs_type=ubifs rootwait=1 |
26 |
nand_src_addr=0x0340000 |
27 |
net_args=run bootargs_defaults;setenv bootargs ${bootargs} root=/dev/nfs nfsroot=${serverip}:${rootpath},${nfsopts} rw ip=dhcp |
28 |
net_boot=echo Booting from network ...; setenv autoload no; dhcp; tftp ${kloadaddr} ${bootfile}; run net_args; bootm ${kloadaddr} |
29 |
nfsopts=nolock |
30 |
rootpath=/export/rootfs |
31 |
script_addr=0x81900000 |
32 |
static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off |
33 |
stderr=serial |
34 |
stdin=serial |
35 |
stdout=serial |
36 |
mtdparts=mtdparts=nand:256k@0(mlo),256k@256k(mlo1),256k@512k(mlo2),256k@768k(mlo3),2m@1m(uboot),256k@3m(env),5m@3328k(env),-@8448k(userfs) |
- « Previous
- 1
- 2
- Next »